EG STARTS 2 Set Chair Mount for Flight Sim Game Joystick, Throttle & Hotas Systems Compatible with Logitech G X56, X52, X52 Pro, Thrustmaster T-Flight Hotas, TCA, T.16000M

this wont fit a secret labs chair too short
quality parts was missing some screws. This wont fit on a a secret labs chair the arms are too short on the mount to reach the arm rests even in the lowest position.,

Chair Mounts
It should be noted. Although the throttle and joystick choices are varied and installation to the mount is stable and secure. Installation of the assembly to a specified chair is NOT and it should be. I actually looked at at 20 + chairs. Most chair seat frames and armrests are different than the product description indicates. To complete the installation a universal chair mount bracket MAY be needed to complete the installation. Although Amazon had the universal chair mount bracket listed. That product should be noted and listed near the chair mount choices. Spending several hours trying to complete this project. One other item the installation of the universal bracket requires the seat cushion mount be removed to install the bracket. Amazon should deliver my bracket Monday,then I can complete the project.

torture to assemble. strong stable mount. excellent clone of monstertech
I mounted a virpil warbrd gimbal and winwing orion 2 throttle base to it. The holes didn’t quite line up correctly with the virpil onto the place but it still managed to work while the winwing throttle uses the entire mounting arm length. These devices use the same mounting template as a thrustmaster warthog set so I suppose I’m pushing it in regards to compatibility.Mounting the arms to the chair was a nightmare to do solo but I managed by turning the chair upside down to let gravity help. You’re trying to keep a steel mounting plate and your chair arm together while sandwiching a spacer all while aligning a bolt to the hole on the chair so I hope you’re good at juggling. I also had to remove the foot rest from my chair as it would no longer fit with the new hardware.After getting the parts that interface directly with the chair mounted up, everything else went together as easy as any other hotas mount.One other gripe, because the horizontal arms are only just long enough for a warthog throttle, I could not attach the winwing viper plate to the throttle.

Cheaper Alternative to the Monstertech System
This product is a cheaper alternative to the Monstertech HOTAS Chair Mount. Mounting plates for the chair are very similar (if not identical) to the Monstertech plates so it should fit many of the same chairs. The vertical posts are 6020 and are sturdy enough for any HOTAS system. The product comes with Universal mounting plates for throttle and stick so should fit any HOTAS system. I had no trouble attaching the Winwing Orion 2 throttle and stick. Everything is very sturdy when attached to the chair.Now for the drawbacks and the reason for just 4 stars. The included instructions are typical of any Chinese product nowadays, relying primarily on pictures to explain things. The package included lots and lots of extra (in other words useless) nuts and bolts. While the parts lists calls them out, the useless pieces are never mentioned again in the rest of the instructions. The instructions call for replacing the bolts that mount the arm to the chair with longer bolts and some spacers that are included in the product. However, only half of the necessary bolts are included; the instructions only call for 4 bolts and 8 are needed. In my installation I didn’t need the spacers so I was able to reuse the original bolts. If you need spacers for your installation, then be prepared to buy 4 more M8x35 bolts.The mounts for the joystick and throttle are easily removable if you buy a set of these: https://www.amazon.com/dp/B07KPGKFSS?ref=ppx_yo2ov_dt_b_product_details&th=1. The thumbscrew knobs are something that should have been included and weren’t.Overall, this is a decent alternative to the Monstertech chair mount system.

Every possible mounting option provided.I’ll be able to upgrade from my x52 to a winwing hosas and the existing mounts will fit.

If your mechanical in your thinking..you can fit this set up on basically any chair. Although the Thrustmaster t-flight is linked by cable..restricted the length between throttle and control stick. I made it work and it adds to the game play.