YOLEO 1100LBS Dumbbell Rack- Adjustable 3 Tier Weight Rack for Home Gym, Heavy Duty Weight Storage Organizer Dumbbell Storage Stand Holder(Rack Only)

Great piece of equipment
We were so pleased with the quality of this rack and the ease of assembly. It took less than 10 minutes from opening the box to setting our dumbbells on it. It even holds our slam balls and it’s adjustable to accommodate different brands and sizes of dumbells. This is a great value and it’s at least $25 more in stores. Also the initial delivery eta was the 29th after ordering it on the 16. We got it by fedex on the 19th. Insanely fast shipping.

Great deal. And room to add more
This thing is nice and sturdy! More room than I thought it would have too. Very pleased, I like that the area the grip sits on is adjustable. It really just feels very well made.

Useable, sturdy and affordable
The reason I say “useable” is because it’s not the best rack with the angle iron struts that make up the actual rack/shelf. Yes, it’s angle iron more or less, so depending on how you decide to put it together, it can be a little sketchy trying not to slam your fingers against the edges when putting heavier dumb bells back. In order for me to fit my Cap dumb bells on it the way I wanted, I had to turn the angle iron inwards, thus the gap between them is too small for a full hand. So basically I pick them up with a couple fingers or two hands. When putting them away you have to be careful, I got myself good one night with a 40 lb dumb bell.I mean, it works fine honestly. Hard to beat it for the price.Its very stable and sturdy with my current weights on it: Pairs of (in pounds) 10s, 15s, 20s, 30s, 40s and 50s.

Good product, light on instructions, here’s a few tips!
Overall, this rack is everything I’d hoped for from the purchase, but there were zero instructions or other useful info included. There was a diagram and a list of parts, but it wasn’t very useful. There was a wrench included of which the 17mm end fit well for the heads of the bolts, but was a bit too large for the nuts. The nuts seemed to call for a 16mm wrench, which was not included, and I have no idea what the 14mm end of the wrench is intended for. I found that a small adjustable crescent wrench worked fine to tighten the nut while holding the head of the bolt with the included 17mm. Read on if you want a couple of specific assembly tips drawn from my experience.To start, I bought this particular rack for a couple of reasons… I was trying to fit a pretty tight space and would have gone with something 30″ if it existed. 24″ wouldn’t hold enough weights for my needs and most of the 36″ rack I found measure 36″ between the insides, so were actually more like 39″-40″ footprint. This one is 36″ end to end (around 32 1/2″ inside) so it better suited to my need.First tip: Don’t wear light colored clothing when assembling! There are some manufacturing oils on all the parts that will tend to rub off on your hands, cloths, rugs, etc. when working with them. I recommend wiping down the main parts using a cloth with a mild cleaner before starting. Probably not needed for the bolts if you’re careful.Second tip, when putting the rubber feet on, put them on starting on the ‘side’ of the foot rather than top or bottom. I found it went on much easier and I was able to get it over the other side more successfully than trying from the top or bottom or bottom to top. It will still take some wiggling to get it all the way on once you get it over all four edges of the square tubing.When putting on the angled cross pieces, start at the bottom, front and back, then work your way up. Drop the bolts in from the top, twist on the nuts and initially, just tighten them finger tight… you’ll probably need the looseness in the overall structure as you try to line up the other bolts and holes. There are no lock washers included, and I considered the idea of adding them, but decided it wasn’t necessary because once assembled, I have no intention of moving it again! For hex or all steel dumbbells, use the outer bolt slot for the front rail. I assume the inner bolt hole is better suited for the vinyl clad dumbbells, but don’t quote me!I found that putting in the top row rails required some muscle to pull the sides apart far enough to slip the bolts in. I don’t know if every assembly will have the same challenge… it’s definitely caused by loose tolerance in manufacturing, but not insurmountable. I considered cutting a 2×4 to the perfect length to wedge between the top of the side pieces, but after some ‘finesse’ I was able to get the rails mounted without having to do that.Finally, tighten down the bolts. It’s a good idea to check the spacing between the front and back rails based on the dumbbells you’re putting on them before tightening. I found that I have a slight angle from one side to the other as the weight become smaller (lower weight). No biggie here, it’s easy enough to loosen and slide the rail later, but it’s worth mentioning if you want a one shot assembly.One other thing you might notice/consider… you’ll see in my photo that I built a shelf for the top row of the rack. As mentioned at the top, I could have gotten away with a slightly smaller rack, but once I had everything assembled and loaded up, it was clear I could stage all the dumbbells on the bottom two levels, so I built a quick shelf from some scrap lumber I had on hand and couldn’t be happier to have the shelf to use for some accessory items. Previously, I had stuff on the floor and strewn around here and there, so this turned out to be an awesome modification.In summary, nice rack, good price, weak instructions, be creative!

Prodotto di elevata qualità, molto funzionale e robusto.Ha soddisfatto appieno le mie aspettative.Ottimo rapporto qualità prezzo.

Weight rack was easy and intuitive to set up and came in far better condition compared to ones i bought from other sellers that had various issues forcing me to make returns. Wish i had found this product sooner, to reduce the time spent wasted handling these returns. I currently only have a few dumbbells up to 25Kg and it does the job.