Baby Monitor Shelf Mount for Hello Baby Corner Camera Shelf Compatible with Infant Optics DXR-8 DXR-5 Arlo Baby Babysense 7 Motorola – Universal Wall Mounts Crib Cam Holder for Infants Video
$ 11.99
Price: $11.99
(as of Mar 31, 2025 06:34:20 UTC – Details)
Product Description
Sully Products provides specialized accessories for products such as Texas Instruments, Arlo, Reolink, Blink, Nest & Ring. You can count on us for factory direct value and highest quality.
Factory Direct ValueIt’s amazing how much you can save if the products are direct from the factory. We offer factory direct value. You will always get a deal if you purchase from Sully Products Highest Quality Products Our products are made from the highest quality plastics and silicone. Each piece of the product is vetted by hand from our quality control process
Compatible for Almost All the Baby Monitor in the Market
With the 1/4″ screw mount on the Sully baby mount, you can install any camera or monitor with it. If your monitor doesn’t have the screw hole, no worries, you can still install your baby monitor with the key shaped hole at the base of the monitor.
NO More Messiness
We help you take care of the mess. There are 3 hinges underneath the mount. You can tie your cable around the hinges in order to shorten the length of the cable.
Install with Ease in Multiple ways
For more security, you can choose to install the mount by screwing onto the wall. Alternatively, you can use the 3M tight stickers to stick on it.
[SUITABLE FOR MOST BABY CAMERAS] This baby monitor mount camera shelf can mount most infants cameras in the market, including Infant Optics DXR-8 DXR 5, Arlo Baby, Babysense, Hello Baby Monitor mount, Motorola MBP36, Summer Infant
[PUT YOUR BABY CAM AT BEST POSITION] The wall mount for baby monitor can place the video camera at the best position. No matter on the wall’s corner or Curb’s side, this baby camera holder can be installed on the surfaces securely.
[MULTIPLE INSTALLATION METHODS] The baby monitor stand mount includes super tight stickers & screws, which can firmly install the Infant Optics Camera Mount in multiple methods. Install your Baby Cam anyhow with ease!
[CABLE CONCEALMENT] This baby monitor stand is designed with hinges at the buttom, which shortens the cable length and conceal the cable perfectly from sight. This Arlo Baby wall mount facilitates better cable management and prevent infants from reaching to the cables.
[FIRMLY SECURE YOUR CAM] The baby monitor wall mount has a 3 1/3’inch screw that fits your video camera, which prevent the cam from slipping off. This corner camera mount provides strong and secure support for your infant monitor camera. It is recommended to use the screws instead of stickers, for walls that are uneven.
Customers say
Customers find the monitor mount works well and is easy to install with adhesive. The durability receives mixed feedback – while some find it sturdy, others say it wasn’t strong enough for the camera. The angle and fit are problematic, with customers noting it’s not a right angle and doesn’t fit the corner properly. The adhesive strength is poor, with multiple customers reporting it doesn’t stick, and the value for money opinion is divided between those who find it excellent and those who consider it a waste of money.
AI-generated from the text of customer reviews
13 reviews for Baby Monitor Shelf Mount for Hello Baby Corner Camera Shelf Compatible with Infant Optics DXR-8 DXR-5 Arlo Baby Babysense 7 Motorola – Universal Wall Mounts Crib Cam Holder for Infants Video
Add a review
Related Products
$ 11.99
J. Cook –
Another good Sully product
This is the second product I’ve got from them and its another success. Tray is perfectly easy to install into a corner above the crib, and the three cutouts do allow the cords to remain tidy beneath the tray, which is a nice touch. Can’t have hanging cables near the baby! I think all screws for the cameras are universal, but that is the only thing I’d be sure to check prior to ordering. My arlo cam fit fine into the screw fine, but it’s the only thing I could see going wrong. (I do wish the screw was not fixed to the tray but something I could tighten myself). Otherwise, its a good tidy solution for a better angle for crib cam.
Brian –
Worked perfect…
This mount is just what I needed for the babysense camera we have. I use 3M Command strips to mount it instead of the supplied hardware so I can remove it anytime. The camera now sits at a perfect angle!
CK –
Does the job and is unobtrusive
I got this because it seemed small and unobtrusive, while getting the job done (mounting the baby monitor). The best part is the cord organizer underneath, since I cant stand messy hanging cords. Iâm not sure if the tilt is working well for me though, as itâs not at the best angle. I may need to play around with it. It is easy to install, although I wish I didnât have to screw it into the wall (since the monitor is not going to a permanent fixture).
Ly –
Does the job easy to install! Donât use the double sided tape
Use the hardware or command strips! Pls donât use the stickers Iâve seen a couple reviews where camera fell off the wall broke or fell on a baby! It does have a gap like everyone says but itâs also supposed to tilt down quite a bit donât let that scare you it works for what itâs intended sturdy (with the screws) for the price I do think it was worth it. The photo above is the camera set up on the mount.
S. McGrath –
Is it suppose to tip like that?
After reading some other reviews, Iâll say1. No it didnât come with instructions but if you even have a quarter of common sense you can figure it out.2. There is one extremely livid mother who had her mount fall off the wall and hit her baby in the head. I would be livid too BUT after looking at the pictures she posted, it looks like she only used the sticky strips and not the screws. Which was a big mistake. The sticky strips it comes with are useless. Maybe use command strips if you donât wanna use the screws.My own personal complaints, the mount didnât fit in the corner of my babyâs room. One side would lay flush with the wall and the other side had a gap. So that was annoying, but workable. But it tips down, and looks like itâs going to fall off the wall even though I know it wonât since I DID use the screws (cause Iâll take holes in the walls over it falling on my babyâs head ). Is it suppose to tip like that? Is that part of the design so thereâs a better angle for viewing the crib? Idk. But in the end it does what itâs suppose to do.
M –
Do not buy this and waste your money!!!!
If I could leave zero stars on this I would. I literally never review some thing and for me to go out of my way and do that means obviously this is a situation.I had professional maintenance installation (who thoroughly followed all directions included in the literature accompanying the mount) for this product and this did not withhold the test of time:One fateful night, well after my child was cozy and snuggled up into bed, this âmountâ catastrophically FAILED as it catapulted off the wall and came barreling down, crashing onto my sleeping childâs HEAD which woke my child up in a state of sheer terror and my child was screaming and crying and didnât go back down to bed after that happened. My child refused to sleep in the bed for the two days following the incident as Iâm sure it was traumatic!I am beyond furious at the situation and I do not recommend ANY PARENT who is concerned about the safety and well-being of their child to utilize this product.THIS PRODUCT IS HAZARDOUS TO YOUR CHILDâS SAFETY.Absolutely deplorable product and shoddy craftsmanship. 0/10I am livid. This is inexcusable and unforgivable.
J. Leaver –
Convenient to use and comes with everything you need.
This works pretty well and comes with all you need to get it installed (aside from the tools you may need, depending on how you use it. It’s very sturdy once installed and allows the cords to easy pass through. The product is exactly like the image portrays. It definitely is an upgrade to the hap-hazard shelf I had it on before. I like the white look too, blends in well with similar colored walls.
Christopher S. –
Great purchase
When our son switched to a toddler bed, we needed a way to see his entire room (previously the camera was pointed right at the crib). This worked perfectly and was very easy to install! Worth the money and weâll be getting one for our daughters room too.
genady –
Great camera mount. Comes with nice cable anchor points, and all sorts of mounting options. Included there is double sided adhesive or screws for more permanent mounting. Do note, if mounting permanently, one must screw into wall before attaching camera. 1/4 inch screw is fixed and does not rotate. Installation can be tool-less if using adhesive strips.
P. Sedach –
This corner shelf is sturdy, well made and flexible enough to fit into most corners. It could be a bit cheaper given the material is plastic – maybe they could make a 2 or 3 pack for 30$. But as is, worth it.
J. Wong –
It’s very affordable but the quality is also great. All the holes were drilled in properly so there was no issue with installing the mount. I recommend this because it is good value for the price.
RM –
Works well.
Stephanie T –
Fell off the wall the first time we tried it with double sided tape.Was advertised to mount infant optics camera but it does not?Discounted given high price