Keepo Pegboard Combination Kit, Pegboards and Accessories Modular Hanging for Gaming Setup, Gaming Station Peg Board, Gaming Organizer, Wall Game Controller Holder, Headset Stand (Black, 33″×22″)

Love this board / Instructions could make it simpler
This is seriously helping me clear some space on my desk, between work and gaming – I always stack my stuff. Was able to hang this within an hour to 1.5 hours, opted to drill in holes to support the added weight. Instructions were OK, felt the drill holes guide page wasn’t needed and opted to do the following:1) Recommend using a level to line things up well & just peel off the adhesive and place all pegboards where you want them.2) Once that is done, remove all the boards and leave the adhesive plastic backing on the wall (it’s an upwards lifting motion)3) Drill a small hole through all the drill holes/and straight through the plastic adhesive4) Remove all the plastic adhesive backs and drill the holes larger if needed5) Add drywall anchors, place the adhesive backings back lining up drill holes with the drywall anchors and screw everything down6) Re-add pegboards to the plastic backings (downwards motion to lock it in)This made it a lot easier to do every step for all boards at once vs. hanging 1 board at a time – good luck!

The customization has uses that even the sellers haven’t thought of yet.
Great buy. Looks awesome and came in handy.

Used adhesive on paint wall. Let’s see if it hold. Will update if needed
One week update:. So far so good. Still up and strong

Easy to setup & I love more organization
I’ve got a space next to my desk that I’ve debated putting shelves up in to have more storage but balked because shelves don’t really cover what I needed next to me. I hadn’t thought about a pegboard system until I saw this. It’s so nice now that I set it up.This set gives you 2 options of how to install it.The mounting braces can either stick with 2 sided adhesive. This method is really simple. Just lock the braces to the board, remove the cover on the adhesive and press to the wall. Then repeat in the layout you want for the rest. This install is rated to 5# per board.Otherwise you can drill holes, insert the expanding plugs, and mount the braces to the wall with screws provided. This also is pretty simple. Inside your box there is a sheet of paper the size of a board section. This shows you the mounting brace and has holes to drill. Just place it on the wall, drill through the 4 holes, add the plugs, screw the brace into the plugs with the screws, install the board, and then move the paper to the next spot. This method is rated to 10# per board.I tried both and went with the screw method for the extra weight. Total install was under 20 minutes for all 6 sections.Now when it comes to your storage options the 6 section set includes a LOT of options. If you check my picture I’ve installed all the pieces into the boards but I’m not sure what to actually put in them yet or where they should be placed but I wanted to show how much you’re getting. You can see some of the things I placed so far: SteamDeck inside case, Davinci Resolve Editor Deck, gaming controller, NReal glasses, and I’ve barely used any of the storage so far.I’m really happy with this and so is my brain that needs to organize and give things a place. I’m thinking I need another for out in my office to help organize it as well.

My order came in quickly; overall I would say the build is sturdy. My only complaint is that one of the accessories that is meant to hold a controller is warped, so it’s not usable.