Plugable USB Audio Adapter with 3.5mm Speaker-Headphone and Microphone Jack, Add an External Stereo Sound Card to Any PC, Compatible with Windows, Mac, and Linux – Driverless

Impressive for the price
This Plugable 1/8 audio plug to USB adapter works very well for the price. It is easy to use and operates immediately. I found little to no extraneous noise or interference.It is a little wider than a normal USB plug, but that is rarely a problem since I do not need plug in two Usb item on the same side.We have used this adapter as a simple way to connect our Behringer mixer to a computer for recording. It worked with or without connecting headphone. If you try to use headphones to monitor through the computer there will be latency. All USB connectors have some latency. That is why there is a headphone connector on this adapter.If you are looking for the absolute best audio adapter to connect to your computer you should use an audio interface (about $90 – $300 for a decent device).We have also used the adapter to connect a mic directly into the computer without a mixer. When using mics, please take note of any phantom power requirements.I have tried several other adapters. This one seems to be the most consistent and has the lowest noise.Remember, if you are using Audacity, you will need to plug it in, and then start the app. Audacity will not likely identify new USB mics with the app is running. Quit and restart the app.Responding to some reviews:You should read the description.It is designed for TRS, not TRRS plugs. If you have a lavaliere with a TRRS plug, like I do, you will need to use a TRRS to TRS adapter. It is a simple thing and most lavalieres come with the adapter. TRS has two lines in the plug and TRRS has three.Make sure you have the plugs firmly connected. This is sound equipment which means that the noise will occur if you do not connect the devices properly.You can connect headphones in the plug to get immediate, no latency, monitoring. No device has zero latency if you listen through the computer while recording.Check the quality of your mic. Some mics will have cord and connector issues.Check your computer’s USB ports. I may be that they are not equally set up. It may also be that they are not exactly the same USB. Check the color of the port. Also, some computers will have slightly different signal strength from one or the other USB ports.Best practice would be to use an audio interface, but many of us try to save money. This item is ay good, low cost alternative for the analog to USB conversion until you move up to an interface.

Windows, Kubuntu, and Fedora + a separate KVM switch = no more cable swapping.
I use this with a USB KVM switch to provide Audio over normal Analog Speakers. This has worked well with Windows and two different Linux Distros. The Audio pops when using the KVM; however, that is the nature of the beast since it cuts power to the device when I switch between systems. I no longer have to swap the speaker cable between devices.

Acheté pour que mon fils puisse utiliser un casque avec micro sur un ancien iMac 2007.Sans cet adaptateur, pas de son vers le micro du casque.Une fois branché et les câbles connectés, il suffit de sélectionner l’adaptateur dans les préférences système (en entrée et sortie)Et ça fonctionne parfaitement ! Sans redémarrer.Le gain en audio est d’environ 25%, sans saturation, ni parasites.La connexion est ultra simple : une sortie USB à mettre de préférence sur l’ordinateur plutôt que sur un hub ; 2 autres sorties, en jack 3,5 pour y mettre les deux entrées casques et micro.L’objet est petit, discret et de belle qualité. La finition est parfaite et semble solide.Le tout livré dans un emballage de taille réduite, en plastique.Je n’ai pas testé l’engin sous Windows mais ça ne devrait pas poser de problème.Bref, un bon compromis pour utiliser un casque micro ou pour remplacer une carte son obsolète ou défectueuse.À moins d’être mélomane mais c’est une autre histoire…

Lo compré porque la integrada de la placa abandonó este mundo. Funcionó en Windows 7 con sólo pincharla en un USB, se instalan los drivers en un par de minutos. Me parece muy útil y muy sencillo. De la calidad del sonido no puedo hablar pues mis altavoces son los del monitor, pero en principio no suena mal.Es más ancha que un usb “normal” de manera que hay que tenerlo en cuenta si los tienes muy juntos en la placa, ya que puede no caber (nada que no solucione un mini hub supongo)